Go and Not Go Gauge for Lampholder E40 7006-25 7006-26 According to IEC60061-3
Go Gauge for screw threads of lampholder (7006-25-7)
Purpose: To check the minimum dimensions of the lampholder screw thread and dimension X shown on sheet 7005-20.
Testing: It shall be possible to screw the gauge into the lampholder without using undue force. (For the torque to be applied in case of doubt, see IEC238, subclause 4.4). When the gauge has been screwed in as far as it will go, the rim of the screw shall of the lampholder shall be co-planar with or project beyond, surface Y1 but it shall not project beyond surface Y2.
Not Go Gauge for screw threads of lamphoder (7006-26-4)
Purpose: To check the maximum minor diameter of the screw thread, dimension D1, of lampholders E10, EP10, EY10, E14, E27, E39, and E40.
Testing: The screw thread of the lampholder shall be assumed to be correct if the gauge does not enter by its own weight so far that the thread protrudes beyond surface T.
Lampholder Gauge List
| Figure number |
Description |
| E14 Lampholder Gauge |
| 7006-25-7 |
Go Gauge |
| 7006-26-4 |
Not Go Gauge |
| 7006-30-2 |
Plug gauge for E14 lampholder for testing contact making |
| 7006-30A-1 |
Plug gauge for lampholder E14 with candle shaped sharp for candle lamps for testing contact making |
| 7006-31-4 |
Gauge for testing Contact making and protection against accidental contact during insertion of lamps in lampholder |
| BS EN60238 Figure 5 |
Test caps for lampholders E14 |
| BS EN60238 Figure 11 |
Test Caps for Lampholders E14 |
| BS EN60238 Figure 13 |
test cap A and Test cap B for Lampholders E14 |
| E40 Lampholder Gauge |
| 7006-25-7 |
Go Gauge for screw threads of lampholder |
| 7006-26-4 |
Not Go Gauge for screw threads of lamphoder |
| 7006-23-3 |
Gauge for protecting against Bulb-neck damage and for testing contact-making in lampholder |
| 7006-24-3 |
Plug gauge for lampholders for testing protection against accidental contact |
| BS EN60238 Figure 5 |
Test Cap for Lampholders E40 |
| BS EN60238 Figure 11 |
Test Cap for lampholders E40 |
| BS EN60238 Figure 15 |
Test Cap for lampholders E40 |
| E27 Lampholder gauges |
| 7006-25A-2 |
"Go" Gauge for Lampholders E27 |
| 7006-26-4 |
“Not Go” Gauges for Screw threads of lampholders E27 |
| 7006-21-5 |
Gauge for testing protection against bulb-neck damage and for testing contact-making in lampholders E27 |
| 7006-22A-4 |
Gauge for Testing contact-making and protection against accidental contact during insertion of lamps in lampholders E27 |
| 7006-22B-1 |
Gauge for detecting side-contacts with ctting-edges in lampholders E27 |
| 7006-22C-1 |
Gauge I for checking side contact resiliency in lampholders E27 |
| 7006-22D-1 |
Gauge II for checking side contact resiliency in lampholders E27 |
| IEC60238 figure 11 |
test cap for tests of insulation resistance, electric strength and temperature rising |
| IEC60238 figure 5 |
test caps |
| IEC60238 figure 14 |
test caps for lampholder E27 |
Note: Please send us the figure number on the inquiry.
Product Tags:
|
|
Lamp Holder Go And No Go Gauge , Cap Torque Tester IEC60061-3 Standard Images
|
